Transfer Response Changelog

Unified Transfer Response Parameters

The changes will be activated in our live system on January 8, 2019 and can already be tested in the OT&E system.

The following transfer parameters are returned on all domain transfer responses and events:

registrar = <INTERNAL USER or EXTERNAL REGISTRAR>
- Property that contains the identifier of the client that SHOULD act upon a PENDING transfer request (losing registrar).
requesting registrar = <INTERNAL USER or EXTERNAL REGISTRAR>
- The identifier of the client that requested the object transfer.
transfer status = <TRANSFERSTATUS>
- The state of the most recent transfer request.
  - pending - transfer-in pending at the registry
  - FOREIGN_PENDING - transfer-out pending at the registry (only used in CentralNic Reseller-API, EPP: pending)
  - REQUESTED - transfer-in requested in CentralNic Reseller (only used in CentralNic Reseller-API, EPP: pending)
  - INITIATED - transfer-in initiated at the registry, similar to "pending" status, only used by a few registries e.g. .org (only used in CentralNic Reseller-API, EPP: pending)
  - USERTRANSFER - internal transfer pending in CentralNic Reseller (only used in CentralNic Reseller-API, EPP: pending)
  - clientApproved - the loosing registrar approved the transfer
  - clientCancelled - the gaining registrar cancelled the transfer
  - clientRejected - the loosing registrar rejected the transfer
  - serverApproved - the registry approved the transfer, auto-approve
  - serverCancelled - the registry or CentralNic Reseller cancelled the transfer
request date = <DATE>
- The date and time on which the transfer was initiated
execute date = <DATE>
- The date and time of a required or completed response. For a PENDING request, the value identifies the date and time by which a response is required.
registration expiration date = <DATE>
- The end of the domain object's validity period if the TransferDomain command caused or causes a change in the validity period.

Registrar property values

The property registrar and requesting registrar can contain the own user name from CentralNic Reseller or an external registrar name:

property[registrar][0] = rrp-user
property[requesting registrar][0] = foreign-registrar
property[transfer status][0] = pending
property[request date][0] = 2015-08-06 14:02:00.0
property[execute date][0] = 2015-08-11 14:02:00.0
property[registration expiration date][0] = 2016-04-18 14:06:58.0

This example shows an initiated outgoing transfer to another registrar:

property[registrar][0] = rrp-user
property[requesting registrar][0] = foreign-registrar
property[transfer status][0] = pending
property[request date][0] = 2015-08-06 15:00:00.0
property[execute date][0] = 2015-08-11 15:00:00.0
property[registration expiration date][0] = 2016-04-18 14:06:58.0

EPP Example:

<?xml version="1.0" encoding="UTF-8"?>
<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
  <response>
    <result code="1001">
      <msg>Command completed successfully; action pending</msg>
    </result>
    <resData>
      <domain:trnData xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
        <domain:name>example.com</domain:name>
        <domain:trStatus>pending</domain:trStatus>
        <domain:reID>rrp-user</domain:reID>
        <domain:reDate>2018-08-02T13:19:35.0Z</domain:reDate>
        <domain:acID>foreign-registrar</domain:acID>
        <domain:acDate>2018-08-07T13:19:35.0Z</domain:acDate>
      </domain:trnData>
    </resData>
    <trID>
      <clTRID>ABC-12345</clTRID>
      <svTRID>396ce82d-47d1-4494-bd23-25d1ed015bf6</svTRID>
    </trID>
  </response>
</epp>

Summary

XRRP

Add new parameters "execute date", "registrar", "requesting registrar", "requested date" and "transfer status" to all TransferDomain responses and Transfer-Events.
On external transfers use the foreign registrar name on response parameter "current registrar" or "requesting registrar".
On internal transfers (USERTRANSFER) replace the value "INTERNAL" on response parameter "current registrar" and "requesting registrar" by the real registrar.

EPP

The values of the transfer response parameters "domain:reID", "domain:reDate", "domain:acID" and "domain:acDate" are being revised.
On external transfers use the foreign registrar name on response parameter "domain:acID" or "domain:reID".
On internal transfers replace the value "INTERNAL" on response parameter "domain:acID" and "domain:reID" by the real registrar.

Metaregistry

The changes mainly affect the TransferDomain and StatusDomainTransfer commands.

TransferDomain

The examples below explain in detail what has changed on the following actions of the TransferDomain command:

Action request
Action cancel
Action deny
Action approve
Action query

Action request

Added new response parameters "execute date", "registrar", "requesting registrar" and "requested date"

Command

command = TransferDomain
action = request
domain = yourdomain.TLD
auth = FooBar123

Response

code = 200
description = Command completed successfully
property[execute date][0] = 2013-08-07 14:22:09.0
property[job id][0] = 100092
property[registrar][0] = registrar1
property[renewal period][0] = 1
property[requesting registrar][0] = registrar2
property[request date][0] = 2013-08-02 14:22:09.0
property[transfer status][0] = INITIATED

Action cancel

Added new response parameters "execute date", "registrar", "requesting registrar", "requested date" and "transfer status"

Command

command = TransferDomain
action = cancel
domain = yourdomain.TLD
auth = FooBar123

Response

code = 200
description = Command completed successfully
property[execute date][0] = 2013-08-02 14:30:22.0
property[registrar][0] = registrar1
property[requesting registrar][0] = registrar2
property[request date][0] = 2013-08-02 14:29:38.0
property[transfer status][0] = clientCancelled

Action deny

Added new response parameters "execute date", "registrar", "requesting registrar", "requested date", "roid" and "transfer status"

Command

command = TransferDomain
action = deny
domain = yourdomain.TLD

Response

code = 200
description = Command completed successfully
property[execute date][0] = 2013-08-02 13:41:26.0
property[registrar][0] = registrar1
property[requesting registrar][0] = registrar2
property[request date][0] = 2013-08-02 13:41:00.0
property[roid][0] = 13438296011048_DOMAIN-KEYSYS
property[transfer status][0] = clientRejected

Action approve

Added new response parameters "execute date", "registrar", "requesting registrar", "request date", "roid" and "transfer status"

Command

command = TransferDomain
action = approve
domain = yourdomain.TLD

Response

code = 200
description = Command completed successfully
property[execute date][0] = 2013-08-02 15:50:32.0
property[registrar][0] = registrar1
property[requesting registrar][0] = registrar2
property[request date][0] = 2013-08-02 15:49:28.0
property[transfer status][0] = clientApproved
property[roid][0] = 15849440711048_DOMAIN-KEYSYS

Action query

Added new action "query" (Required for EPP Standard)

Command

command = TransferDomain
action = query
domain = yourdomain.TLD

Response

code = 200
description = Command completed successfully
property[execute date][0] = 2013-08-06 14:27:09.0
property[registrar][0] = registrar1
property[registration expiration date][0] = 2014-04-18 14:06:58.0
property[requesting registrar][0] = registrar2
property[request date][0] = 2013-08-06 14:02:04.0
property[transfer status][0] = serverCancelled

StatusDomainTransfer

Renamed response parameter "request registrar" to "requesting registrar"

Command

command = StatusDomainTransfer
domain = yourdomain.TLD

Response

code = 200
description = Command completed successfully
property[execute date][0] = 2013-08-06 14:27:09
property[registrar][0] = registrar1
property[registration expiration date][0] = 2014-04-18 14:06:58
property[requesting registrar][0] = registrar2
property[requested date][0] = 2013-08-06 14:02:04
property[transfer status][0] = serverCancelled